Comments on: Heat Presses http://tedstahl.com/2009/08/heat-press-comparison/ Let's Talk About Heat Printing Thu, 09 Feb 2012 17:36:12 +0000 hourly 1 http://wordpress.org/?v=3.3.1 By: L J Robin http://tedstahl.com/2009/08/heat-press-comparison/comment-page-1/#comment-112 L J Robin Sun, 28 Feb 2010 16:52:11 +0000 http://tedstahl.com/?p=125#comment-112 A good platen cleaner is EZ OFF from www.heatpressessentials.com This product is used in the cleaner industry for cleaning irons with scorching build up. A good platen cleaner is EZ OFF from http://www.heatpressessentials.com
This product is used in the cleaner industry for cleaning irons with scorching build up.

]]> By: Ted http://tedstahl.com/2009/08/heat-press-comparison/comment-page-1/#comment-23 Ted Mon, 05 Oct 2009 20:27:26 +0000 http://tedstahl.com/?p=125#comment-23 I’ve certainly been guilty of not using a cover sheet or doing some kind of heat press application that one way or the other left a goopy mess on the upper heat platen. Sylvie, you didn’t mention if your press had a Teflon coating or not. If it does, usually you can clean it by letting the platen heat up and then rubbing vigorously with a rag, but you have to rub pretty hard, but it should come off. (wear heat proof hand protection when attempting this) If it’s not a heat press that has a Teflon-coated platen, you might have to use some light sandpaper or maybe a cleaner called GoJo, which has a light pumice sand in it, used in industrial situations or by car mechanics for removing nasty stuff from hands, or any other heavy degreaser with hot soapy water. (of course when the machine is unplugged) However, if you use something with grit, such as Comet cleanser or Ajax on a Teflon-coated platen, you can scratch the heater. If you don’t want to go to all this cleaning trouble, maybe you can try using a Teflon cover sheet to protect your garments during application. Stahls’ offers a QuickSlip Pad protector to protect the bottom platen from stains and also make it easier to get garments on and off the lower platen. I’ve certainly been guilty of not using a cover sheet or doing some kind of heat press application that one way or the other left a goopy mess on the upper heat platen. Sylvie, you didn’t mention if your press had a Teflon coating or not. If it does, usually you can clean it by letting the platen heat up and then rubbing vigorously with a rag, but you have to rub pretty hard, but it should come off. (wear heat proof hand protection when attempting this) If it’s not a heat press that has a Teflon-coated platen, you might have to use some light sandpaper or maybe a cleaner called GoJo, which has a light pumice sand in it, used in industrial situations or by car mechanics for removing nasty stuff from hands, or any other heavy degreaser with hot soapy water. (of course when the machine is unplugged) However, if you use something with grit, such as Comet cleanser or Ajax on a Teflon-coated platen, you can scratch the heater. If you don’t want to go to all this cleaning trouble, maybe you can try using a Teflon cover sheet to protect your garments during application. Stahls’ offers a QuickSlip Pad protector to protect the bottom platen from stains and also make it easier to get garments on and off the lower platen.

]]> By: Sylvie http://tedstahl.com/2009/08/heat-press-comparison/comment-page-1/#comment-20 Sylvie Thu, 01 Oct 2009 15:28:30 +0000 http://tedstahl.com/?p=125#comment-20 Hi Ted! I didn't know where to leave this comment, but here goes: We have a heatpress, and the plattens will eventually need a good clean-up (even if we were very careful during 6 years of use!) Do you have something we could use - I can't seem to find anything that really does the job... we're screenprinters so we did try the polythinner and varsol - to no avail... Oh - and the stuff would need to be available to Canada since we are in Quebec! :-) Thanks Ted! Sylvie Hi Ted!

I didn’t know where to leave this comment, but here goes:

We have a heatpress, and the plattens will eventually need a good clean-up (even if we were very careful during 6 years of use!)

Do you have something we could use – I can’t seem to find anything that really does the job… we’re screenprinters so we did try the polythinner and varsol – to no avail… Oh – and the stuff would need to be available to Canada since we are in Quebec! :-)

Thanks Ted!

Sylvie

]]>